Serving Richland, WA and surrounding areas. (509) 392-6617
Your backyard has more potential than gravel or bare dirt. We build concrete patios in Richland that drain properly, hold up to Eastern Washington heat and freezes, and give you a real outdoor space you will actually use.
Concrete patio construction in Richland involves excavating the area, compacting a gravel base to handle the local soil conditions, pouring a reinforced slab with proper slope for drainage, and finishing the surface to your preference - most patios are active construction for one to two days, with a full curing week before use.
Most homeowners reach out because their backyard has no usable outdoor surface, or their existing slab has cracked, settled, or started directing water toward the house. Richland gets over 300 sunny days a year, which means a good patio pays dividends all season long. If you are also considering decorative options for your new surface, our stamped concrete services can turn a standard slab into something that looks like stone or brick.
If your backyard is just grass, gravel, or bare dirt with no defined area for furniture or gathering, you are missing one of the most-used features of a Richland home. With 300-plus sunny days a year in the Tri-Cities, a patio pays for itself quickly in how much time you actually spend outside.
If you can see cracks wider than a pencil, sections that have shifted, or puddles that sit on the surface after rain, your existing slab has likely failed at the base level. These problems worsen each winter as water freezes in the cracks. In Richland's freeze-thaw cycle, a compromised slab deteriorates quickly once it starts showing these signs.
If you notice water pooling near your foundation after rain or irrigation, the grade of your yard - or an old slab - may be directing water the wrong way. A new patio is poured with a slight slope built in, directing water away from your home. Left uncorrected, water near the foundation is one of the most expensive problems a homeowner can face.
Many Richland homes, especially those built in the 1990s and 2000s, use crushed basalt or pea gravel as a yard surface. It is low maintenance until it starts migrating into the house. A concrete patio gives you a clean, defined surface that stays put and is easy to sweep or hose down after one of the area's frequent dust events.
We build new concrete patios from the ground up - excavation, gravel base compaction, forming, reinforcement, pouring, and finishing. Every patio is graded with a slope away from the house to prevent water pooling near the foundation. Finish options include standard broom texture, exposed aggregate, and decorative stamped concrete patterns that replicate the look of stone or brick. For larger outdoor projects, we can pour the patio slab and a connecting concrete pool deck as part of the same project.
We also handle patio extensions - adding square footage to an existing slab that is still sound - and full replacements when the old surface has failed at the base. If your project involves permits through the City of Richland or HOA approval in neighborhoods like Horn Rapids or Badger Mountain South, we work through that process with you before any digging starts.
Best for backyards that have no existing hardscape - we start from scratch and build a properly graded, reinforced slab sized for your space.
Suits homeowners with a cracked or heaving existing slab that needs to come out entirely before a new surface can be poured.
Right for homeowners whose existing slab is sound but too small - we pour an addition that matches the grade and finish of what is already there.
Ideal for homeowners who want the durability of concrete with the appearance of natural stone, tile, or brick at a lower cost than the real materials.
Richland's Columbia Basin climate creates real challenges for concrete flatwork. Summer temperatures that exceed 100 degrees cause concrete poured without precautions to dry too fast on the surface - which leads to cracking before the interior has fully hardened. Winter freeze-thaw cycles work water into small surface gaps and expand them. The sandy, loose soil under most Richland neighborhoods - deposited by the ancient Missoula Floods - shifts more than the clay-heavy soils in western Washington, making a thick, well-compacted gravel base essential, not optional. We schedule pours during the right seasonal window and use mixes and finishing techniques appropriate for Eastern Washington conditions.
The City of Richland requires a building permit for most new concrete flatwork, and newer neighborhoods like Horn Rapids and Badger Mountain South often have HOA requirements on top of that. We handle the permit process and work with HOA guidelines before any work begins - so there are no surprises after the slab is poured. We serve Richland and the wider Tri-Cities area, including West Richland and Kennewick.
We come to your yard in person to measure the area, assess the slope, and talk through finish options. You get a written estimate within 1 business day that breaks down what is included and what it costs - no phone guesses.
We apply for the City of Richland building permit before any digging starts. This typically adds a week or two to the timeline. We handle the process - you do not need to navigate the permit office yourself.
The crew excavates the area, removes existing sod or old concrete, and compacts a gravel base. In Richland's sandy soil this step takes most of the first day. The concrete pour and finishing happen in a single day after the base is ready.
The slab may be covered with plastic sheeting to slow drying in Richland's dry wind - which actually makes the concrete stronger. We walk the finished patio with you, explain care instructions, and apply sealer if it was included in your project.
We come to your yard in person, give you a written estimate with no surprises, pull the required permit, and do not ask for full payment before we start. Call or fill out the form and we will reply within 1 business day.
(509) 392-6617Sandy, alluvial soil needs more thorough compaction and a deeper gravel bed than denser soils in other parts of Washington. We do not use a one-size-fits-all base depth - we account for your specific soil conditions, which is what separates a patio that holds for 30 years from one that cracks in three.
Every patio we pour has a slope built in to direct water away from your home. A flat slab looks neat but sends water toward your foundation over time. Getting the grade right from the start protects your foundation and prevents the puddle problems that plague improperly graded flatwork.
Every contractor working in Washington above a certain dollar threshold must be registered with the state Department of Labor and Industries, carry insurance, and be bonded. You can verify our registration on the L&I contractor resource page. That registration protects you if something unexpected happens.
Unpermitted concrete work can surface during a home sale and cost far more to resolve than the permit ever would have. Every patio we build in Richland goes through the City's building process properly - so you have documentation that the work was inspected and approved, and you never have to worry about it later.
A well-drained patio on a solid base, built to city code and suited to Richland's climate, is what every project we take on delivers - not just the ones that feel like premium jobs.
Still have questions? Call us at (509) 392-6617 or send us a message. We give straight answers with no obligation.
Add texture and pattern to your patio slab - stamped concrete gives you the look of natural stone or brick without the cost of the real material.
Learn moreSlip-resistant concrete surfaces around pools, designed to handle Richland's intense sun and to drain water away from the pool edge.
Learn moreSpring booking slots fill fast in the Tri-Cities. Call or request a free estimate online today and we will schedule your on-site visit before the best pouring window closes.
